Emerson Radio iE600BK - Manual (Page 26)

25
Presetting Station In The Tuner Memory
The tuner in this system has 20 preset station memories. You can store up to 10 of
your favorite FM stations and 10 of your favorite AM stations in the memory for
easy and immediate recall at any time.
1.) Tune to the first station you wish to memorize using either the Manual or
Automatic Tuning methods described on page 23.
Example: FM 93.5 MHz STEREO.
2.) When the desired station appears on the display press the Memory/Program
button once.
NOTE: The Memory/Program button on the main unit is located beneath
the Secondary Control Cover.
The MEM indicator and the CH 01
indicators flash in the display.
3.) Within 10 seconds, while the indicators are still flashing, press the Memory/
Program button again to enter your station in memory channel 01.
The MEM and CH 01 indicators stop
flashing. The CH 01 indicator remains
in the display for 10 seconds and then
disappears.
4.) Tune to the next station you wish memorize. When the desired frequency
appears on the display, press the Memory/Program button, then press the
Dir/Ch + button to advance the memory channel display from 01 to 02.
Press the Memory/Program button once more to store the station in memory
channel 02.
5.) Repeat step 4, selecting a different memory channel number each time until
you have entered up to 10 FM stations in the tuner memory.
6.) Press the Radio/Band button to select the AM band and then repeat steps 1
through 5 to enter up to 10 AM stations in the tuner memory.
iE600_050407.p65 4/5/2007, 11:50 25