Epson 5000XB User Manual
Page 96
4 • Using the ELP Link II Software
78
Changing the Test Pattern
1. Click Test Pattern on the Projector Set dialog box. The following
window appears:
2. You can display a test pattern when setting up the projector to
verify that the projector is working properly. Choose one of the
following:
Color Image Displays a color bar test pattern.
Gray Scale Displays a gray scale test pattern.
Focus Pattern Displays a character-based focus pattern.
User File(bmp)
Displays a bitmapped test pattern from the file
name specified. Either type the name or click
Ref... (refer) to browse the hard disk for the file.
The bitmap should be 1024 x 768 pixels (dots).
3. Click Pattern Display to display the test pattern selected. Then
click Close.
pro-ch4.fm Page 78 Monday, November 10, 1997 1:37 PM