Emerson Process Management Bristol ControlWave Express - Manual (Page 3)

Product Data Document
420DS-6d / D301311X012
June 2011 - Page 3
ControlWave
®
Express
Remote Automation Solutions
Website: www.EmersonProcess.com/Remote
Specifications
CPU
32-bit ARM processor: 14 & 33 MHz CPUs •
Sleep mode for low power applications •
Real time clock/memory battery backup: 9000 •
hours
Program execution and Data Memory : 2 MB
•
battery backed SRAM memory
Data and file storage memory: 8 MB Flash for
•
Program source, historical Archive and Audit
storage
Optional solar power regulator
•
LED status indicators – 6 failure status LEDs, •
Watchdog and CPU Idle and communication
LEDs
Communication
Two RS-232 and one selectable RS-232/RS- •
485 serial communication port supporting baud
rates up to 115.2 KB
One optional 100/10 Base-T Ethernet port with
•
RJ45 connector
One RJ45 connector for interface to
•
ControlWave LCD display/keypads
Power Input
5.4 to 16 Vdc power input with 14 MHz CPU •
- Surge suppression 16 V transorb
11.4 to 28.0 Vdc power input with 33 MHz CPU
•
- Surge suppression 30 V transorb
Power-fail detection and recovery sequencer
•
Battery voltage monitor •
Reverse voltage protection •
Housing
Mounting base plate: 10.75” H x 5.5” H x 2.0”D •
(27.3 cm x 14.0 cm x 5.0 cm)
Mounting: Flat or edge panel mounting, or
•
optional DIN mount
Environmental Specifications
Operating Temperature range • :
-40 to 70
o
C (-40 to 158
o
F), storage up to 85
o
C
Relative Humidity • :
15-95% non-condensing
Vibration
• :
1.0g for 10-150 Hz - 0.5g for 150Hz to 2000Hz
Hazardous Area Approvals
• :
non-incendive for operation in Class I, Division 2
CPU RFI
Immunity: ENV 50140 Radio-frequency •
electromagnetic field amplitude modulated EMC •
Emissions: EN 55022:1998 Class A ITE •
emissions requirements (EU)
ICES-003 Issue 3 Class A Digital Apparatus
•
emissions requirements (Canada)
AS/NZS3548:1995/CISPR Class A ITE
•
emissions requirements (Australia)
I/O RFI Susceptibility
3V/m – 80 MHz to 1000Mhz (IEC 1000-4-3) •
Power consumption
14 MHz CPU: 0.036 watt
33 MHz CPU w/o Ethernet: 0.12 watt
33 MHz CPU with Ethernet: 1.0 watt
DIO card: 0.018 watt
DIO plus AIO card: 0.021 watt