Panasonic NV-GS27EB - Manual (Page 35)

Edit mode
35
LSQT1006
Using the DV Cable for Recording
(Digital Dubbing)
By connecting other digital video equipment with
DV terminal and the movie camera by using the
DV cable VW-CD1E (optional)
1, high-image-
quality dubbing can be done in digital format.
This model cannot be used as a Recorder.
≥Set to Tape Playback Mode.
(Player/recorder)
1 Connect the movie camera and digital video
equipment with the DV cable.
2 Start playback. (Player)
3 Start recording. (Recorder)
4 Stop playback. (Player)
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
Audio dubbing (NV-GS37 only)
You can add music or narration to the recorded
cassette.
(Audio dubbing can only be performed by
using the remote control.)
≥Set to Tape Playback Mode.
1 Find a scene that you want to add sound to,
and press the [
;] button on the remote
control.
2 Press the [AUDIO DUB] button on the
remote control to make audio dubbing
ready.
3 Press the [ ;] button on the remote control
to start audio dubbing.
≥Talk into the built-in microphone.
4 Press the [ ;] button on the remote control
to stop audio dubbing.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
1
DV
DV
;
A.DUB ;
A.DUB ¥
LSQT1006ENG.book 35 ページ ２００５年１２月９日 金曜日 午前１１時１７分