Electrolux E36EC75HSS - Manual (Page 8)

8
Setting Surface Controls
LOCATIONS OF THE SURFACE RADIANT ELEMENTS
Your appliance is equipped with radiant surface burners with 4
different wattage ratings. The ability to heat food quicker and in
larger volumes increases as the element wattage increases.
The radiant surface elements are located on the cooktop as
follows (See Figure):
- 2 smaller 6 inch radiant elements located at the right and left
rear positions;
- 1 dual 6 or 9 inch radiant element located at the right front
position;
- 1 triple 5, 7 or 9 inch radiant elements located at the left
front position;
- 2 7 inch radiant elements located at both the center front
and rear position;
- one Bridge radiant element located between center front and
rear elements.
SURFACE COOKING SETTINGS
Use the chart to determine the correct setting for the kind of food you are preparing. The
Simmer settings are used to simmer and keep larger quantities of foods warm such as
stews and soups. The lower Simmer settings are ideal for delicate foods and melting
chocolate or butter.
Note: The size and type of cookware used will influence the setting needed for best cooking
results.
Recommended Settings for Surface Elements
Setting Type of Cooking
HIGH (HI) Start most foods, bring water to a boil, pan broiling
MEDIUM HIGH (8-10) Continue a rapid boil, fry, deep fat fry
MEDIUM (6) Maintain a slow boil, thicken sauces and gravies, steam
vegetables
MEDIUM LOW (2 - 4) Keep foods cooking, poach, stew
LOW (LO) Keep warm, melt, simmer