5 rear panel, 5 rear, Panel – EverFocus ECOR264-D2 User Manual
Page 14
6
1.5 REAR PANEL
During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the rear panel.
Figure 1-2 Rear Panel
○
1
Alarm In:
Connect up to 4/8 alarm inputs, selectable between N.O./N.C. contacts.
○
2
Alarm Out:
N.C or N.O type alarm out (form “C”).
○
3
Audio In:
Connect line level output of an audio preamplifier to the audio input connection
corresponding to the appropriate camera.
○
4
Video In:
Connect camera’s video output or other composite video source to the video input
connection.
○
5
Video Out:
Looping Outputs - connect the camera video signals to other equipment as required.
○
6
RS232 socket: 9-pin D-Sub control input for RS-232.
○
7
USB 2.0:
USB port recommended for connecting the USB mouse.
○
8
LAN:
RJ-45 network connection 10/100 Mbps Ethernet. There are two LEDs on the LAN jack;
Green LED means network is connected, amber LED flickers when data is being
exchanged.
○
9
POWER:
Plug the DC 12V power source provided
into the power socket.
○
6
○
5
○
7
○
8
○
10
○
11
○
12
○
9
○
1
○
2
○
3
○
4