Epson DLR3-08N/660CDV - Manual (Page 8)

8 DLR-XXN/XX
Connections on the rear
Note: Connections optionally for NTSC or PAL operation.
VIDEO IN 1
LOOP1
VIDEO IN 2
LOOP2
VIDEO IN 3
LOOP3
VIDEO IN 4
LOOP4
VIDEO IN 5
LOOP5
VIDEO IN 6
LOOP6
VIDEO IN 7
LOOP7
VIDEO IN 8
LOOP8
VIDEO IN 9
LOOP9
VIDEO IN 10
LOOP10
VIDEO IN 11
LOOP11
VIDEO IN 12
LOOP12
VIDEO IN 13
LOOP13
VIDEO IN 14
LOOP14
VIDEO IN 15
LOOP15
VIDEO IN 16
LOOP16
SPOT VIDEO OUT
NETWORK RS-232C VGA NO C NO NC NO ARI GND /RX+ /RX-
TX+ TX-
C
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, CAUTION: DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
GND GND AI9 AI11 AI10 AI12 AI13 AI14 AI15 AI16 AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8 GND GND
1 2
 4 11 1 7 5 6 8 9 10 12
No. Designation Functions/connections Example devices
1 VIDEO IN 1-16 Max. 16 video channels Cameras
2 LOOP 1-16 Max. 16 loop-through video channels Cameras
 SPOT Video output Spot Monitor
4 VIDEO OUT Video output Monitor
5 VGA PC monitor PC monitor
6 RS-22C External interface Modem
7 NETWORK Network Network cable
8 AI1 - AI16 Alarm inputs for external devices Sensors
9
/RX+, /RX-,
TX+, TX-
External interface (RS-485) Keyboard, PTZ camera
10 ARI/GND Reset alarm with external signal Switch
11 NO, C, NC Alarm outputs for external devices Siren, flashing light
12 Reset switch Reset to factory defaults -
1 Power supply Mains power connection -