Electrical installation – Electrolux 6310 DK User Manual
Page 9
 
9
Check whether your cooking utensils 
has level bases by placing the item in 
question upside down on a work top 
and positioning a ruler on the base. A 
curved base, both inwards and 
outwards, will prolong the cooking 
time and increase the energy 
consumption. If the diameter of the 
base is too small, the energy 
consumption will increase, and any 
food boiling over will burn onto the 
hot cooking zone.
Cooking utensils with very 
shiny/bright bases will prolong the 
cooking time slightly compared with 
cooking utensils with matt/dark bases.
16
The electrical connection may only be 
performed by a qualified electrician/ 
competent person. The electrical 
connection must be carried out in 
accordance with prevailing regulations 
for appliances using heavy current. 
The connection must comply with any 
specific requirements specified by the 
local electricity supply authority.
There must be no interference with 
any of the unit’s electrical parts.
The cable is mounted in the pegs as 
shown.
Unscrew the cover while connecting 
the cables.
A unit led directly to the power point 
or the outlet rose.
More units may be connected via one 
or more junction boxes.
The cable must be connected via an 
external switch with a contact 
separation of at least 3 mm in each 
pole.
Please observe these instructions, 
otherwise the warranty will not 
cover any damage that may occur.
Single-phase zero-earth 
Cable type 1,5 mm² HO5VV-F.
The cable outside diameter must be 
between 7,5 and 10,5 mm.
Cover
Electrical installation