Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 236)

MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS
B Logout: Initiates a disconnect sequence from the mailbox.
Edit
This allows you to Edit the message headers for a Forwarding or Reverse
Forwarding process.
J
This function when initiated responds with the TNC's MHeard list. This list will
contain the eleven most recently heard stations.
M
This will let a remote user switch memory banks in the Mailbox RAM.
T
When this command is initiated will allow a remote user to PAGE the SYSOP.
H(elp) Displays the mailbox command list, with a brief description of commands, available
to the user.
MAILLED ON/OFF
Mode: Packet Default: ON
Parameters:
ON
The STA led serves as a Mail present indicator and performs normal functions.
OFF
The STA led only performs it's normal functions.
When MAILLED is ON, the MFJ-1278B's STA LED will not flash while the Mailbox is
ON. However, the STA LED will flash if mail is present in the Mailbox for the SYSOP. The
STA LED reverts to its normal function, lit when unacknowledged packets are pending, if the
MFJ-1278B is in a CONNECTED state, or if MAILLED is OFF.
MALL ON/OFF
Mode: Packet Default: ON
Parameters:
ON
Monitored packets include both "connected" packets and "unconnected" packets.
OFF
Monitored packets include only "unconnected" packets.
This command determines the class of packets which are monitored. If MALL is OFF, only
otherwise eligible packets (as determined by the BUDLIST and LCALLS commands) sent
by other TNCs in the unconnected mode are displayed. This is the normal manner of
operation when this MFJ-1278B is being used to talk to a group of TNCs all of which are
unconnected.