Enterasys Networks 802.1Q - Manual (Page 59)

Quick VLAN Walkthrough
VLAN Configuration 3-37
20. On the 802.1Q VLAN Main Menu screen, use the arrow keys to highlight the PORT
FILTERING CONFIGURATION menu item. Press ENTER. The Port Filtering
Configuration screen displays.
21. Use the arrow keys to highlight the Port field.
22. Press the SPACE bar to step the field to display 2.
23. Use the arrow keys to highlight the Filter All Untagged Frames field.
24. Press the SPACE bar to toggle the field to display YES.
25. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
26. Press ENTER. The message “SAVED OK” displays. The Port Filtering Configuration screen
displays the Port VLAN List for port 2 and the Filtering All Untagged Names field is set to YES
as shown in
Figure 3-15 .
Figure 3-15 Final Walkthrough Stage
This effectively completes the displaying of the Port VLAN List and the setting of the port filtering
of all untagged frames.
Firmware Revision: XX.XX.XX
Port Filtering Configuration
25992-20
Module Type: xxxxx-xx
BOOTPROM Revision: XX.XX.XX
6C105 LOCAL MANAGEMENT
Slot Number: xx
RETURN EXIT
Filter Using VLAN Lists: [NO]
Filter All Untagged Frames: [YES]
VLAN ID
0001
0001 VLAN Name
DEFAULT VLAN
1Q TRUNK
SAVE PREVIOUS NEXT
Port : [10]
Port VLAN List