Data delete command, Home position command, International character set command – Epson 420i User Manual
Page 54: Buzzer command, Reset command
Data Delete Command
59. (7F)H (127)D, (FF)H (255)D
This code deletes one character worth of data. This code is ignored during the pro-
portional print mode.
Home Position Command
60. (1B, 3C)H (27, 60)D, (9B, BC)H (155, 188)D
This code moves the print head to the home position.
International Character Set Command
6 1 .
(Epson mode only)
(1B, 52, n)H (27, 82, n)D
In the Epson Printer mode, this command selects from one of the 8 international
character sets as shown in the table below.
n
Country
0
U.S.A.
1
France
2
Germany
3
U.K.
4
Denmark
5
Sweden
6
Italy
7
Spain
n is binary number.
Buzzer Command
62. (07)H (07)D, (87)H (135)D
This code causes the buzzer to sound for approximately 1/3 second.
Reset Command
63. (1B, 40)H (27, 64)D (9B, C0)H (155, 192)D
This code initializes the printer. Data input after this code is not deleted
48