Husqvarna 327P5X - Manual (Page 17)

ASSEMBLY
English – 17
of 4 Nm. After the machine has been in use for around 20
hours, re-tighten the screws to 4 Nm.
Assembly of the saw attachment
(327P5)
Assembly
• Loosen the coupling by turning the knob.
• Align the tab of the attachment (A) with the arrow on
the coupling (B).
• Push the attachment into the coupling until the
attachment snaps into place.
• Before using the unit, tighten the knob securely.
Dismantling
• Loosen the coupling by turning the knob (at least 3
times).
• Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
A
B