Hauppauge WinTV USB - Manual (Page 37)

Starting VTPlus
If the VTPlus application is provided on CD-ROM, then it will automatically be
installed from the Installation CD-ROM.
To start VTPlus, click on the VTPlus button in WinTV32 or click on the
TELE button in WinTV2000. this will close the TV application and launch
VTPlus. The WinTV USB cannot run the application and VTPlus at the same
time.
You need to create a VTPLUS suite within the WinTV 32 or WinTV 2000
applications.
(Go to configure-channels, Suite manager, Suites) and choose ADD suite and
name the new suite “VTPLUS”.
Configuring VTPlus
The first time that you run VTPlus, it is recommended that you first check the fol-
lowing configuration setting:
Go to Options, Program options, and make sure that in the General tab,
Multiple Channel Mode is selected but not Background Memory Active.
If Background Memory Active is selected and greyed out then, temporarily,
you will need to de-select the Multiple Channel Mode option.
4-2
WinTV-USB Installation and Reference Manual