Hayter Mowers R53S and R53A Recycling Mower 111-2842 Rev B - Manual (Page 24)

Folding the Handle
Upright Position
1. Step on the foot pedal and hold it down (Figure 53).
Figure 53
2. Move the handle to the upright position (Figure 54).
Figure 54
Forward Position
1. With the handle in the upright position, step on the
foot pedal and hold it down.
2. Move the handle all the way forward and loosen the
upper handle knob (Figure 55).
Figure 55
3. To unfold the handle, refer to Unfolding the Handle.
Removing the Mower from
Storage
1. Remove the spark plug and spin the engine rapidly
using the starter to blow the excess oil from the
cylinder.
2. Install the spark plug and tighten it with a torque
wrench to 15 ft-lb (20 N-m).
3. Charge the battery.
4. Connect the spark plug lead to the spark plug.
24