Humax COMBO-9000 - Manual (Page 46)

5. Preferences
GB45
User’s Manual
4. MyEPG
You can set whether or not to use the MyEPG.
1. Select MyEPG using the / button.
2. Press the OK or button to select On/Off .
Note:
•
MyEPG will be automatically updated in the standby mode when MyEPG is set to On.
• The product is automatically powered off and on again whenever MyEPG setting changes.
5.7 MHP Settings
1. Press the MENU button.
2. Select Preferences using the / button and press the OK
or button.
3. Select MHP Settings using the / button and press the
OK or button.
1. i Display by MHP App.
1. Select i Display by MHP App. using the / button.
2. Press the OK or button to select Enable/Disable.
2. Show MHP logo
1. Select Show MHP logo using the / button.
2. Press the OK or button to select Enable/Disable.