Husqvarna 223R - Manual (Page 25)

English – 25
TECHNICAL DATA
Technical data
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Technical data 223R
Engine
Cylinder displacement, cu.in/cm
3
1,50/24,5
Cylinder bore, inch/mm 1,26/32
Stroke, inch/mm 1,06/27
Idle speed, rpm 2700
Recommended max. fast idle speed, rpm 11000-11500
Speed of output shaft, rpm 8014
Max. engine output, acc. to ISO 8893, kW/ rpm 0,8/9000
Catalytic converter muffler No
Speed-regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro MB
Spark plug NGK BPMR 7A/Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,9/4,5
Sound levels
(see note 1)
Equivalent sound pressure level at the user ′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max: 98/99
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-2003, m/s
2
At max. speed, left/right handles, min.: 5,0/4,6
At max. speed, left/right handles, max.: 6,1/5,9
Approved accessories Type Cutting attachment guard, Art. no.
Centre hole in blades/cutters, Ø 25,4 mm
Arbor shaft thread M10
Grass blade/grass cutter
Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02
Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02
Plastic blades Tricut Ø 300 mm 503 93 42-02 / 503 97 71-01
Trimmer head
Trimmy Fix 503 93 42-02 / 503 97 71-01
Superauto II 1" 503 93 42-02 / 503 97 71-01
S35 503 93 42-02 / 503 97 71-01
T35 503 93 42-02 / 503 97 71-01
Support cup Fixed -