HP 3900 series User Manual
Page 58
Image is printed at an angle
Verify that no problem exists with the source image. For example, if you are printing a
scanned image, verify that the image was not crooked when it was scanned.
If the problem is not caused by the source image, follow these steps:
1.
Remove all paper from the paper tray.
2.
Load the photo paper correctly in the paper tray.
3.
Verify that the paper guide fits firmly against the edge of the paper.
4.
Follow loading instructions for the paper type.
Edge of the photograph is faded
Verify that the photo paper is not curled. If the photo paper is curled, place the paper
in a plastic bag and gently bend it in the opposite direction of the curl until the paper
lies flat. If the problem persists, use photo paper that is not curled.
For instructions about preventing photo paper from curling, see the
page.
Photo has unwanted border
If the photo has an unwanted border, follow these
Chapter 10
56
HP Deskjet 3900 series