HP iPAQ hw6500 - Manual (Page 56)

Using the Phone Features 5–10
Making a Call
1. From the Today screen, tap the iPAQ Wireless button in the
Command bar.
2. Tap the Phone icon on the iPAQ Wireless screen.
Alternate: Tap the
icon in the Navigation bar >
Turn off flight mode (activates the wireless radio which turns on
your phone).
3. Press the green Answer/Send button on the Thumb
keyboard or from the Today screen, tap Start > Phone.
4. Tap the number you want to call, and then tap Talk or press the
green Answer/Send button from the Thumb keyboard.
NOTE: Press the Blue key to access the numbers on the Thumb Keyboard.
Refer to the following sections for alternate ways to make a call:
• ”Making a Call from Contacts”
• ”Making a Call Using Speed Dial”
• ”Making a Call From Call History”
• ”Making a Conference Call”
Answering a Call
When you receive a phone call, the HP iPAQ rings or vibrates and a
message appears on the screen, giving you an option to either answer or
ignore the incoming call.
•
Tap Answer on the Phone keypad or press the green
Answer/Send button on the Thumb keyboard to receive
the call.
NOTE: To silence the phone and reject the call, tap Ignore. This may
send the caller to your voicemail or send out a busy signal, depending on
your service provider.
Ending a Call
When your phone call is finished, tap End on the Phone keypad or press
and hold the red End Call button to end the call.
Making a Call from Contacts
• Tap on the Contacts icon located on the Thumb keyboard, tap
and hold the contact’s phone number, and then tap Call Work,
Call Home, or Call Mobile.
• To make a call from an open contact, tap the number you want
to call.