Hitachi 46W500 - Manual (Page 79)

DVD ADVANCED MENU
79
MODE
Use this feature to program tracks for Audio CDs and MP3 discs.
The disk should be in stop mode.
Press ADVANCED button, the select MODE to go to PROGRAM mode.
Press THUMBSTICK
̆ , ̄ to highlight a track, then press THUMBSTICK SELECT.
Press ADVANCED button, then select CLEAR to erase the most recently entered track.
Press PLAY to start playback of programmed tracks.
NOTES: 1. While the program is being played back, the STOP works as follows.
2. Press STOP once and then PLAY again, playback will restart from the point where STOP was pressed. (Program
continued).
3. Press STOP twice and then PLAY again, playback will restart from the track in the usual way. (Program cleared).
4. Up to 99 programs can be entered.
5. If you wish to repeat the current track in the program, press REPEAT repeatedly until TRACK appears during
playback. If you wish to repeat the entire program press REPEAT repeatedly until ALL appears during playback.
Random Playback
Use this function to shuffle the playing order of tracks instead of playback in the original sequence.
In stop mode, press ADVANCED button, then select MODE.
Press ADVANCED button, then select MODE again.
Press PLAY to start random playback.
NOTE: If you wish to repeat the current track in the random selection, press REPEAT repeatedly until TRACK appears during
playback. If you wish to repeat the entire random selection press REPEAT repeatedly until ALL appears during playback.
CLEAR
PLAY
ENTER
CD [AUDIO] TOTAL 0:03:30
PROGRAM
1 3:30
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
1 3:30
1/2
PLAY
CD [AUDIO] TOTAL 0:47:36
RANDOM PROGRAM
-- no indication --
RANDOM