Husqvarna 326HDAX-Series - Manual (Page 2)

2 – English
KEY TO SYMBOLS
Symbols
WARNING! Hedge trimmers can be
dangerous! Careless or incorrect use can
result in serious, even fatal injury.
Please read the operator’s manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• Hearing protection
• Approved eye protection
Cutting tool. Do not touch the tool without
first switching off the engine.
This machine is not electrically insulated. If
the machine touches or comes close to high-
voltage power lines it could lead to death or
serious bodily injury. Electricity can jump
from one point to another by arcing. The
higher the voltage, the greater the distance
electricity can jump. Electricity can also
travel through branches and other objects,
especially if they are wet. Always keep a distance of at least
10 m between the machine and high-voltage power lines and/
or any objects that are touching them. If have to work within
this safe distance you should always contact the relevant
power company to make sure the power is switched off before
you start work. This machine can be dangerous! Make sure
that no people or animals come closer than 15 m (45 ft) when
the machine is running. Electricity can jump from one point to
another by arcing. The higher the voltage, the greater the
distance electricity can jump. Electricity can also travel
through branches and other objects, especially if they are wet.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always be
used.