Cleaning tools, Automatic brush roll, Automatic brush roll indicator – Hoover WindTunnel Wind Tunnel vacuum cleaner User Manual

Page 7: On off, Cleaning lightweight flexible rugs, Edge cleaning, How to attach tool cover, How to clean tools, Select proper tool

Advertising
background image

7

Automatic brush roll
indicator

(some models only)

When red is in the OFF window, brush
roll is STOPPED.

When red is in the ON window brush roll
is ROTATING.

AUTOMATIC

BRUSH ROLL

ON

OFF

2-10

2-11

2-12

2-13

Cleaning lightweight
flexible rugs

Stand on one end of rug and move
cleaner toward other end or edge.
Before reaching edge, push down on
handle. This will lift up the front of clean-
er as shown and will prevent rug from
clinging to cleaner.

Continue to lift front of cleaner so that
when you have reached the edge, it is
completely off the rug. Move cleaner
back to start again, lower front of cleaner,
and use only forward strokes.

Edge cleaning

Special edge groomers are provided
on both sides of the front of the cleaner
to remove dirt in carpet near base-
boards and furniture.

Guide either side parallel to the edge of
carpet or furniture.

How to attach tool

cover

The tool cover is designed with a
“break-away” feature which allows it to
snap free if it is pushed open too far.

To reattach, align hinges of cover with
slots on sides of tool storage area.

Push cover down to secure in place.

How to clean tools

To clean the hose, wipe off dirt with a
cloth dampened in a mild detergent.
Rinse with a damp cloth.

Cleaning tools may be washed in warm
water with a detergent. Rinse and air
dry before using.

Cleaning tools

When using cleaning tools,

cleaner

handle should be in the upright posi-
tion to activate the automatic “brush
roll OFF” and for convenience in
moving the cleaner from one area to
another.

Turn cleaner OFF before disconnect-
ing and connecting hose to hose tube
(A).

To use hose, lift hose end as shown.

2-14

A

Select proper tool

B. Dusting brush

may be used for

carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds,
baseboards, shutters, and registers.

C. Furniture nozzle

may be used for

upholstered furniture, draperies, mat-
tresses, clothing, automobile interiors,
and carpeted stairs.

D. Crevice tool

may be used in tight

spaces, corners and along edges in
such places as dresser drawers, uphol-
stered furniture, stairs and baseboards.

E. Wands

are used to give extra length

to your hose. Use them with any of the
above tools.

F. Powered hand tool

may be used for

upholstered furniture, carpeted stairs
and hard-to-reach places.

2-15

F

D

E

C

B

Advertising