Hearth and Home Technologies GATEWAY - Manual (Page 10)

Heat & Glo • Gateway • 288-900 Rev. W • 10/08 10
Figure 3.1 Appliance Locations
44 in.
(112 cm)
44 in.
(112 cm)
3 3
Framing and Clearances
Note:
• Illustrations reflect typical installations and are FOR
DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design
preference.
Fire Risk
Provide adequate clearance:
• Around air openings
• To combustibles
• For service access
Locate appliance away from traffi c areas.
A. Selecting Appliance Location
When selecting a location for your appliance it is important to
consider the required clearances to walls (see fi gure 3.1).
NOTE: For actual appliance dimensions refer to Sec-
tion 16.
WARNING