Hitachi DV-RX7000E - Manual (Page 25)

English - 25
English
This menu is used to set the current time.
You need to set the time to use timer recording.
With the unit in stop mode, press the
MENU button.
Using the 34 buttons, move the
selection bar to “Setup” then press OK
to select.
Select “System” the 34 buttons, then
press the 1 or OK button.
Select “Clock Set” using the 34
buttons, then press the 1 or OK button.
Use navigation 342 1 buttons to
input Time, Date,Year. Use number
button to input clock data directly. 5
4
3
2
1
Check the date and time.
• If it is correct, press OK then the date and time will be
saved.
• If it is incorrect, input correct Time, Date, Year using
navigation 342 1 buttons or number button.
Press OK then the date and time will be saved.
When you need to change clock setting, you can set up
it manually. (See page 25)
■ Now, DVD-Recorder is ready for use. Function for
“Plug & Auto Set Up” is fixed already. So if you
want to change this fixed one, you can change it
by Presetting the Stations in OSD “Manual Setup”
menu. (See page 27) NOTE
9
Clock Set
RETURN OK MOVE EXIT
Clock Set DVD-RAM(VR)
Time Date Year
00
Auto Clock :
: THU 01 2004 JAN 12
Off
RETURN OK MOVE EXIT
Setup DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN OK MOVE EXIT
System DVD-RAM(VR)
System
Language
Audio
Video
Parental Control
RETURN OK MOVE EXIT
System DVD-RAM(VR)
Clock Set
Install
CM Skip Time : 15 Sec
AV1 Output : Video
NICAM : On