HONDA GX340 - Manual (Page 23)

23
Semi-dry type
Oil bath type
Oil capacity: GX240 GX270 …
GX340 GX390 …
AIR CLEANER
COVER
AIR CLEANER
COVER
ELEMENT
(Foam)
OIL
LEVEL
ELEMENT
(Steelwool)
ELEMENT
Unscrew the wing nut, remove the
air cleaner cover and remove the
element.
Fill the air cleaner case to the level
mark with the same oil that is recom-
mended for the engine (see engine
oil recommendations on page
).
Empty the oil from the air cleaner
case and wash out any accumulated
dirt with nonflammable or high flash
point solvent. Dry the case.
Reinstall the element and the cover.
0.06 (0.06 US qt , 0.05 Imp qt)
0.08 (0.08 US qt , 0.07 Imp qt)
Reinstall the air cleaner element and
the cover.
Wash the element in a non-
flammable or high flash point
solvent and dry it thoroughly.
Soak the element in clean engine oil
and squeeze out the excess oil.
Unscrew the wing nut, remove the
air cleaner cover and remove the
element.
Wash the element in a solution of
household detergent and warm
water, then rinse thoroughly, or
wash in nonflammable or high flash
point solvent. Allow the element to
dry thoroughly.
Soak the element in clean engine oil
and squeeze out the excess oil. The
engine will smoke during intial start-
up if too much oil is left in the
element.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
6