Husqvarna 327RX - Manual (Page 3)

CONTENTS
English – 3
Contents Note the f ollowing before
starting:
Please read the oper ator’s manual carefully.
KEY TO SYMBOLS
Symbols 2
CONTENTS
Contents 3
Note the f ollowing before starting: 3
INTR ODUCTION
Dear Customer , 4
WHA T IS WHAT?
What is what on the clear ing saw? 5
GENERAL SAFETY PRECA UTIONS
Impor tant 6
Personal protective equipment 6
Machine
′
s safety equipment 7
Cutting equipment 10
ASSEMBL Y
Fitting the handlebar (323RII) 12
Fitting the handlebar (327Rx, 327RDx) 12
Assemb ling and dismantling the two-piece shaft
(327RDx) 13
Assembling the cutting equipment 14
Fitting a blade guard, grass blade and grass cutter 14
Fitting the blade guard and saw blade 14
Fitting other guards and cutting attachments 15
Adjusting the harness and clearing saw 16
Standard harness 16
FUEL HANDLING
Fuel saf ety 17
Fuel 17
Fuelling 18
ST ARTING AND STOPPING
Chec k before starting 19
Starting and stopping 19
W ORKING TECHNIQUES
Gener al working instructions 21
MAINTENANCE
Carb urettor 26
Muffler 28
Cooling system 29
Bevel gear 29
Air filter 29
Two-piece shaft 30
Spark plug 30
Maintenance schedule 31
TECHNICAL D ATA
T echnical data 32
EC-declaration of conformity 33
!
W ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
W ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.