Hand Held Products 2D IMAGER 4800P - Manual (Page 75)

4800p 2D Imager User’s Guide 6 - 21
UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
UPC-A Addenda Required
When Required is scanned, the imager will only read UPC-A bar codes that
have addenda. You must then turn on a 2 or 5 digit addenda listed on page 6-
21 . Default = Not Required.
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar code and
the data from the addenda. When turned off, there is no space.
Default = On.
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On
* Not Required
Required
Off
* On