Hitachi H90SB OM H 90SB - Manual (Page 6)

5
NAME OF PARTS
Fig. 1
NOTE:
Install the side handle with the supplied 4 bolts and 4 spring lock washers. Tighten the
bolts securely with the supplied wrench.
SPECIFICATIONS
Motor Single-Phase, Series Commutator Motor
Power Source Single-Phase, 115V AC, 60 Hz
Current 12.2A
Full-Load Impact Rate: 850/min
Weight 68.4 lbs (31.0 kg)
ACCESSORIES
CAUTION:
Only following genuine accessories for this power tool should be used.
The use of any other attachment or accessory is not recommended because it may cause
hazard including bodily injury.
STANDARD ACCESSORIES
1. Hexagon Bar Wrench 10 mm (for M12) (Code No. 993740) ........................................... 1
2. Hexagon Bar Wrench 6 mm (for M8) (Code No. 872422) ............................................... 1
3. Hexagon Bar Wrench 4 mm (for M5) (Code No. 944458) ............................................... 1
4. Side Handle (Code No. 956527) ........................................................................................ 1
5. Bolt (Code No. 949759 Z) .................................................................................................. 4
6. Spring Lock Washer (Code No. 949457 Z) ....................................................................... 4
Front cover
Retainer
Side handle
Housing
Handle
Name plate
Bolt, Spring lock washer
(M8 x 30)
Housing cover
Hexagon socket
hd. bolt (M5 x 10)
Tail cover
Switch trigger