Hitachi 46EX3B - Manual (Page 34)

CARE OF YOUR PROJECTION TV AND REMOTE CONTROLS - 34 -
• SOUND SETTING
Use the sound settings to improve the sound performance of your TV depending on
listening conditions.
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
Use the CURSOR , to select a function.
Press ENTER to set a function or to turn it on or off.
• MTS MODE (Multi-Channel Television Sound)
will allow you to select STEREO (a stereo broadcast), SA (second audio) program
which may be a secondary language, weather report, etc. or MONO (monaural sound)
used when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you
select will be displayed to the left of the channel number. See example below for each
selection when both stereo and second audio are received (monaural is always
received).
• DYNAMIC BASS
This function allows you to enjoy spectacular bass sound that would normally be heard
only with expensive home speaker systems.
• LOUDNESS
This function will improve the quality of both low and high frequency sounds when
listening at low volume levels.
• INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use
only speakers from a separate stereo system.
CARE OF YOUR PROJECTION TV AND REMOTE CONTROLS
DO
• Dust the screen and cabinet with a soft cloth.
• Clean the screen with a soft cloth moistened in warm water. Dry with a soft cloth. (A