Hitachi 13K 50UX26B - Manual (Page 82)

SPECIFICATIONS
82
Norcross, GA 30093 Honolulu, HI 96819
Tel: 770-279-5600 Tel: 808-836-3621
For TV's purchased in Canada only, please contact one of the Hitachi offices
below, should you have any questions regarding service, operation or technical
assistance.
MONTREAL TORONTO VANCOUVER
3300 Trans Canada 6740 Campobello Road 54 Humber Place, Annacia Industrial
Estate
Point Claire, Quebec
Mississauga, Ontario New Westminster, B.C.
H9R 1B1 L5N 2L8 V3M 6A6
Tel: (514)697-9150 Tel: (905) 821-4545 Tel: (604) 526-8566
Fax: (514)697-2209 Fax: (905) 826-6627 Fax: (604) 526-8127
error(s) in manual:
Page 24, PIP, see note
ii
This can only be done on the UX models. The user cannot customize the PIP location on the SX
models. There are two versions of this manual, the one you are looking at now and one that explains
this note. The caller could have either one.
ONCE YOU HAVE THE PIP TURNED ON TO SINGLE, YOU CAN THEN MOVE THE PIP BOX
WITH THE CURSOR ARROW KEYS. THEN WHEN YOU PRESS MOVE THE PIP BOX SHIFTS
BETWEEN THE FOUR POSITIONS ONE OF WHICH WILL BE WHERE YOU MOVED THE BOX
TO. SIMPLE ENOUGH? A CALLER MOVED THE PIP FROM THE LOWER LEFT TO THE
UPPER LEFT AND WHEN HE USED MOVE AT THAT POINT HE WAS ONLY GETTING 3 PIP
BOX POSITIONS! --THE CATCH, IT TOOK FOUR PUSHES OF MOVE TO ROTATE THRU THE
THREE POSITIONS. ONCE HE MOVED IT BACK TO THE LOWER LEFT CORNER HE HAD HIS
FOUR POSITIONS BACK. 10/17/96.
iii
The Main Freeze function is listed in some versions of the manual but not others.
iv
Personal Messages is listed only in certain versions of this manual.
v
Personal Message appears in only some versions of this manual.