HONDA HRX217TDA - Manual (Page 16)

BEFORE OPERATION
14
Clip Direction
Clip Director Knob Adjustment
Adjust the clip director knob in any one of the ten positions to achieve
the desired mowing results.
To adjust the clip director knob, pull the knob downward and towards
the rear of the mower. The knob adjusts a sliding door from the fully
open BAG position to the fully closed MULCH position (see the
following page).
If a high resistance is noticed when moving the clip director knob from
side-to-side, excessive grass may have built up on top of the sliding
door.
IMPORTANT SAFETY PRECAUTION
Always turn the engine off and disconnect the spark plug cap before
lifting the discharge guard to view or clean around the sliding door.
This will prevent contact with the rotating blades and prevent objects
from being thrown into the discharge area.
CLIP DIRECTOR KNOB
SLIDING DOOR
(fully closed)
DISCHARGE
GUARD