haier 50FREE-1 - Manual (Page 9)

Push "spin" button to set spin
procedure.
In standard, carpeting programs,
push the "spin" buttonto set
different spin time (0
1 3
5 7 minutes).
In fibre programs, push the "spin"
buttonto set spin procedure.
In saving and superfast
wool
programs,pushing "spin" button
has no effect.
20
15 Thrice
Twice
Once
Description of operation button
a
5 Push operation button
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or
the selection mode
Start/paush button
After the power is switched on,press it to
start the machine
During working,push it to pause.
During pause,push this button to restart
and go on working Soak Wash Rinse Spin
Soak Soak
Wash Wash
Rinse
Spin Spin
Start Start
Pause Pause
Push "soak" button to set soak
procedure.
In standard, carpeting programs,
push "soak" button to set different
soak time (10, 20, 30 minutes)
In fibre programs, push "soak"
button to set soak procedure,
but soaktime can not be changed.
In saving and superfast wool
programs, pushing "soak"
button has no effect.
"Soak" button
Push "wash" button to set wash
procedure.
In standard,carpeting programs,
push "wash" button to set
different wash time (0
6 9
15 20 minutes)
In fibre programs, push "wash"
button to set wash procedure,
but washtime can not be
changed.
In saving and superfast
wool
programs, pushing "wash"
button has no effect.
"Wash" button "Rinse/ " button Sterilize
Push "rinse/sterilize"button to
set rinse procedure.
In standard,carpetingprograms,
push "rinse" button toset
different rinse times (0, 1, 2, 3 )
In fibre programs,push the
"rinse/sterilize"button to set
rinseprocedure, but rinse times
can not be changed.
In saving and superfast
wool
programs, pushing "rinse"
buttonhas no effect.
Push this botton for 2 seconds
or longer the sign of
Sterilize
will be lightened,that mean the
function is chosen
Push this botton for 2 seconds
again will clear this function ,the
sign will be turued off
"Spin" button
Push this button for 2 seconds or longer,
the sign of "sterilizate "will be lightened.
That mean that function is chosen.
Off
Sterilize
Sterilize
Push and hold the reserve button and spin button, then push down the
power on/off button .The digitron displays C L .You can continue setting
desired washing procedures. After setting ,push down the start/pause
button. The child lock function is activated. all of the buttons are locked
and cannot make selection .
Release the child lock function :push down reserve button and spin
button at the same time for more 2 seconds .After a beep sound ,the child
lock function is released.
Child lock function
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap is firm,
so as to prevent dropping from improve Installation
position.
1.After using,Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Take down the water inlet hose
Lock