HotBrick VPN Client - Manual (Page 14)

HotBrick VPN Client User Manual Property of HotBrick — 2005 14
4.4.1 Settings description
Once the parameters are set, click on “Save & Apply” to save and to take into account the new configuration.
4.4.2 Advanced configuration ("Advanced" Button)
Name Label for Authentication phase used only the configuration user interface. This
value is never used during IKE negotiation. It is possible to change this name at
any time and read it in the tree control. Two Phase 1 can not have the same
name.
Interface IP address of the network interface of the computer, through which VPN con-
nection is established. If the IP address may change (when it is received dy-
namically by an ISP), select "*".
Remote Gateway IP address or DNS address of the remote gateway (in our example: gate-
way.mydomain.com). This field is mandatory.
Pre-shared key Password or key shared with the remote gateway.
Certificate X509 certificate used by the VPN client (see certificate configuration).
IKE encryption Encryption algorithm used during Authentication phase (3DES, AES ...).
IKE authentication Authentication algorithm used during Authentication phase (MD5, SHA ...).
IKE key group Diffie-Hellman key length.