Hitachi VT-FX6402A - Manual (Page 32)

32
Note: To reactivate auto tracking, simply eject the tape and reinsert it into the VCR.
SPECIAL PLAYBACK EFFECTS
Variable speed playback
Still Playback (Pause)
Press the PAUSE button on the remote control to still the tape during play.
The picture will "freeze". You may see some minor noise or interference on the screen. This is normal.
• To resume play, press the PLAY button or PAUSE button again.
Note: The sound is muted and cannot be heard during "Special Playback Effects".
• After 1 minute in the PAUSE mode, the VCR automatically switches to STOP mode to protect the tape.
• If noise bars appear on the TV screen during the PAUSE mode, first set the VCR to the SLOW mode by
pressing the (4) button during playback and then press the CH ( or ) button on the remote control to
minimize the noise bars (see page 26).
• If the screen jitters during PAUSE, press the CH ( or ) button to minimize the jitters.