Hotpoint NVLR333ET - Manual (Page 15)

The dryer needs to be properly vented. Carefully follow the details
on Exhausting in the Installation Instructions.
■ Use only rigid metal or flexible metal 4
″
diameter ductwork
inside the dryer cabinet or for exhausting to the outside.
■ Do not use plastic or other combustible ductwork.
■ Use the shortest length possible.
■ Do not crush or collapse.
■ Avoid resting the duct on sharp objects.
■ Venting must conform to local building codes .
Venting the dryer.
15
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Follow the below for the best drying performance.
Correct Venting
Incorrect Venting