Husqvarna X50 - Manual (Page 2)

ITEM
NO.
PART
NUMBER
DESCRIPTION QTY.
1 505836701 BLADE HOUSING 1
2 505836801 BLADE GUARD, LOWER 1
3 505837001 DEPTH ARM 1
4 505837201 ARBOR SHAFT 1
5 505491501 WASHER, OUTER ARBOR 1
6 521898202 FLANGE HEX BOLT 5/16-18 X 3/4 1
7 505837601 HUB, MILWAUKEE MOUNT 1
8 505839201 MOTOR, 120V 1
9 505633001 WASHER, SPLIT 5/16" S.S. 1
10 505838001 WHEEL, X50 1
11 505838101 SPACER, .375"ID X 2.000"L 1
12 505838201 ELBOW, DEFLECTOR 1
13 505839001 DEPTH LABEL 1
14 505748301 INSERT, 1/2-13 X 5/16-18 2
15 505838401 FLAT SPRING NUT, #10-24 1
16 505772901 FHS, 10-24 x 3/4 S.S. 5
17 505726601 SHSB, 5/16 X 1 1/4 1
18 505837101 THUMB NUT, #10-24 1
17 505725801 SHSB, 1/4 X 3/4 1
20 505635301 WASHER, #10 FLAT S.S. 1
21 505838701 BHS, 10-24 X 3/8 S.S. 1
22 505633101 WASHER, SPLIT #10 S.S. 1
23 505727701 HHB 3/8-16 X 3.5 1
24 505632801 WASHER, SPLIT 1/4" S.S. 1
25 505838601 NUT, 3/8-16 HEX, S.S. 1
26 505627301 HHB 1/4-20 X .375 S.S. 1
27 505627801 SHCS 1/4-20 X 3/4 S.S. 1
28 505838801 SPRING, TORSION, BLADE BLOCK 1
29 505627901 SHCS 1/4-20 X 1 S.S. 1
30 505624301 THUMB NUT, 1/4-20 1
31 505731001 WASHER, SPLIT 3/8" S.S. 1
32 505630501 NUT, NYLOC, 1/4-20 CAD 1
33 505630401 NUT, NYLOC, #10-24 CAD 1
34 505724801 FENDER WASHER, #10 FLAT 1
35 505837301 SKIDPLATE, 5" STANDARD, X50 1
36 505861102 GUIDE ARM ASSEMBLY 1
37 505862201 BLADE BLOCK COVER ASSEMBLY 1
Form No. SCI-0005 Rev. A 04/2005
X50 HANDHELD FINISHING SAW
ASSEMBLY GAS SAW
SUB-ASSEMBLY BILL OF MATERIAL
SOFF-CUT INT'L, INC. CLAIMS PROPRIETARY RIGHTS TO THE MATERIAL DISCLOSED IN THIS DOCUMENT. THIS
DOCUMENT IS PROVIDED IN CONFIDENCE AND MAY NOT BE REPRODUCED OR DISCLOSED WITHOUT
WRITTEN PERMISSION FROM SOFF-CUT INT'L. © COPYRIGHT 2005, SOFF-CUT INT'L, INC. ALL RIGHTS RESERVED.
966844701