Hitachi 53SWX01W EN - Manual (Page 21)

CONNECTING EXTERNAL VIDEO SOURCES
21
CONNECTING A DVD OR HDTV SET TOP BOX PLAYER WITH DOLBY DIGITAL OPTICAL OUTPUT TO INPUT 1 or 2
COMPONENT: Y-P
B
P
R
1. Connect the cable from the Y OUT of the DVD player or HDTV Set Top Box to the INPUT (Y) jack, as shown on the TV set
below.
2. Connect the cable from the CB/PB OUT or B-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PB) jack.
3. Connect the cable from the CR/PR OUT or R-Y OUT of the DVD player or HDTV Set Top Box to the INPUT (PR) jack.
4. Connect the cable from the OPTICAL OUTPUT of the DVD player or HDTV Set Top Box to the OPTICAL INPUT jack.
5. Press the INPUT button, to view the program from the DVD player or HDTV Set Top Bx. The VIDEO icon disappears
automatically after approximately eight seconds.
6. Press the INPUT button to return to the previous channel.
NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 15 for tips on REAR PANEL CONNECTIONS.
3. If your device is connected to INPUT 1 component jacks, make sure to select VID1-OPTICAL from the
THEATER-INPUT SOURCE menu. If it is connected to INPUT 2 component jacks, make sure to select VID2-
OPTICAL from the THEATER-INPUT SOURCE menu.
VIDEO
OUTPUT
Back of
SET-TOP BOX player
OPTICAL
OUTPUT VIDEO
OUTPUT
Back of
DVD player
OPTICAL
OUTPUT
STOP
CONNECT ONLY 8 OHM SPEAKERS
DO NOT SHORT CIRCUIT
THESE TERMINALS
(Such damage is NOT COVERED
by your television warranty)
P B
P R
L
REAR SPEAKER
8 Ω ONLY
R
MONITOR
OUT
INPUT 2 INPUT 1
AUDIO
(MONO)
L
R
AUDIO
L
R
S-VIDEO S-VIDEO
VIDEO VIDEO
ANT A
TO
CONVERTER
ANT B
AUDIO
L
R
(MONO)
S-VIDEO
VIDEO Y
AUDIO
TO HI-FI
R L
SUB
WOOFER
OPTICAL
INPUT
COAXIAL
INPUT
P B
P R
Y
PR/CR PB/CB Y
HDTV SET-TOP BOX
PR PB Y
OR
DVD Player
Hitachi Model or
Similar Model
OR