Hitachi 65F59A - Manual (Page 12)

Laserdisc player, VCR,
AUDIO AMP
VCR #1 DVD Player
To an
amplifier/
receiver with
optical input
capability.
External
Digital
Component
with HDMI
output
capability
AUX/PHONO INPUT
L R
OUTPUT
S-VIDEO V L R
OUTPUT
R L P B /C B P R /C R Y
OUTPUT
S-VIDEO V L R
Outside Antenna
or Cable
AIR / CABLE
Upgrade Card
VIDEO
AUDIO TO Hi-Fi
AUDIO
L
R
S - VIDEO
MISE EN GARDE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
HIGH-DEFINITION MULTIMEDIA INTERFACE
Y
VIDEO
Y
VIDEO
B P
R P
P
P
B
R
TV AS CENTER
INPUT 1 INPUT 2 INPUT 3 INPUT 4
OPTICAL OUT
Digital Audio
MONO MONO MONO MONO
HDMI INPUT
HDMI OUT
OPTICAL IN
12
TIPS ON REAR PANEL CONNECTIONS
• S-VIDEO, Y-P B P R and HDMI
connections are provided for
high performance laserdisc
players, VCRs etc. that have
this feature. Use these
connections in place of the
standard video connection if
your device has this feature.
• If your device has only one
audio output (mono sound),
connect it to the left audio
jack on the television.
• Refer to the operating guide of
your other electronic equipment
for additional information on
connecting your hook-up
cables.
• An AUDIO system can be used
by connecting the AUDIO TO HI-FI
output of the TV. This can be
use when you like to control the
volume output by changing the
volume of the TV.
• You may use VIDEO or
S-VIDEO inputs to connect to
INPUT 1, INPUT 2 or INPUT 5,
but only one of these may be
used at a time.
• Connect only one component
(VCR, DVD player, camcorder,
etc.) to each input jack.
• COMPONENT: Y-P B P R (INPUT 3 and INPUT 4)
connections are provided for high performance
components, such as DVD players and set-top-
boxes. Use these connections in place of the
standard video connection if your device has this
feature. INPUT 3
and INPUT 4 accepts both
composite and component video signals.
• Your component outputs may be labeled Y, B-Y,
and R-Y. In this case, connect the components
B-Y output to the TV’s P
B input and the
components R-Y output to the TV’s P R input.
• Your component outputs may be labeled Y-C B C R .
In this case, connect the components C B output to
the TV’s P B input and the components C R output to
the TV’s P R input.
• You may use composite and component video
signals for INPUT 3 and INPUT 4.
• It may be necessary to adjust TINT to obtain
optimum picture quality when using the Y-P
B P R
inputs (see page 34).
• When using an HDMI input from a Set-Top-Box, it
is recommended that a 1080i or 720p input signal
is used.
NOTE: 1. Connect only one component to each
input jack.
2. Follow connections that pertain to your
personal entertainment system.
3. INPUT 3 and INPUT 4 can accomodate
Composite and Component video signals.
4. Cables are not included with the purchase
of this TV, except when noted as
“provided”.
MACROVISION NOTES:
1. Video signals fed through a VCR may be
affected by copyright protection systems
and the picture will be distorted on the
television.
2. Connecting the television directly to the
Audio /Video output of a Set-Top-Box will
assure a more normal picture.
Rear Panel Connections
First time use