Operation – Homelite UT08120D User Manual

Page 10

Advertising
background image

Page 10

n

Operate blower at the lowest possible throttle speed to

do the job.

�n Check the equipment before operation, especially the

muffler, air intakes, and air filters.

�n Use rakes and brooms to loosen debris before blowing.
�n In dusty conditions, slightly dampen surfaces when water

is available.

�n Conserve water by using power blowers instead of hoses

for many lawn and garden applications, including areas
such as gutters, screens, patios, grills, porches, and
gardens.

�n Watch out for children, pets, open windows or freshly

washed cars, and blow debris safely away.

�n Use the full blower nozzle extension so the air stream can

work close to the ground.

�n After using blowers or other equipment, CLEAN UP!

Dispose of debris in trash receptacles.

�n Use the wide sweeper nozzle for the everyday blowing

operation. This nozzle allows for more area to be covered
during the blowing operation.

�CRUISE CONTROL (THROTTLE LOCK)

See Figure 7.
The Cruise Control (throttle lock) can be used to operate the
blower without holding the throttle trigger.

TO ENGAGE THE CRUISE CONTROL

(THROTTLE LOCK):

n

Turn the Cruise Control knob clockwise, toward the back

of the blower, and stop at the desired throttle setting.

n

To release the Cruise Control, depress and release the

throttle trigger.

Fig. 6

OPERATION

WIDE SWEEPER

NOZZLE

Fig. 7

CRUISE CONTROL KNOB

(THROTTLE LOCK)

THROTTLE

TRIGGER

Advertising