HONDA F220 - Manual (Page 21)

19
OPERATION
HONDA F220 (E) 00X31-V14-6120 -
OPERATING THE CONTROLS FOR TILLING
If the tines dig in but the machine will not move forward, move the handlebars
from side-to-side. When turning, push down on the handlebars to bring the
tiller’s weight to the rear; this will make turning easier.
Handlebar Height Adjustment
Stop the engine before adjusting
the handlebar height.
To adjust the handlebar height,
loosen the handlebar height
adjuster, select the appropriate
holes and tighten it.
Clutch
When the main clutch lever is
squeezed, the clutch is engaged,
and power is transmitted to the
transmission.
When the lever is released, the
clutch is disengaged, and power
is not transmitted.
HANDLEBAR
HEIGHT
ADJUSTER
MAIN CLUTCH
LEVER
F220_EN.book 19 ページ ２０１０年２月１２日 金曜日 午前１１時２分