HONDA F220 - Manual (Page 14)

12
CONTROLS
HONDA F220 (E) 00X31-V14-6120 -
Main Clutch Lever
The main clutch lever engages and
disengages the transmission that
drives the tines.
Drag Bar
The drag bar controls tilling
depth and should always be
used when tilling. It enables you
to compensate for the hardness
of the soil. Ideal drag bar height
will depend on the type of soil
being tilled and soil conditions
at the time of tilling. In general,
the drag bar should be adjusted
so that the tiller is tilted slightly
backward.
Front Wheel
The front wheel is used to help
move the tiller from one place
to another. Lift the tiller by the
handlebars to roll the tiller on
the front wheel. Return the
wheel to the raised position
before tilling. Always stop the
engine before lowering or
raising the wheel.
ENGAGED
CLUTCH LEVER
DISENGAGED
DRAG BAR
RETAINER
PIN
TILLING
POSITION
TRANSPORT
POSITION
FRONT WHEEL
F220_EN.book 12 ページ ２０１０年２月１２日 金曜日 午前１１時２分