HONDA F220 - Manual (Page 39)

37
SERVICING YOUR TILLER
HONDA F220 (E) 00X31-V14-6120 -
CLUTCH CABLE ADJUSTMENT
1. Set the handlebar height in the center position (see page 19).
2. The clutch spring should extend 0.08 ± 0.02 in (2.0 ± 0.5 mm) when the
main clutch lever is moved from the DISENGAGED position to the
ENGAGED position.
3. If the spring extension length is incorrect, loosen the lock nut and turn the
adjusting nut in or out just enough to extend the spring. Do not overtighten.
After adjustment, tighten the lock nut.
THROTTLE CABLE ADJUSTMENT
Measure the free play at the lever tip.
Free play: 0.39 – 0.59 in (10.0 – 15.0 mm)
If the free play is incorrect, loosen the lock nut and turn the adjusting nut in
or out as required.
After adjustment, tighten the lock nut.
0.08 ± 0.02 in
(2.0 ± 0.5 mm)
ADJUSTING NUT
LOCK NUT
CLUTCH SPRING END
ADJUSTING
NUT
THROTTLE
LEVER
0.39 – 0.59 in
(10.0 – 15.0 mm)
LOCK NUT
F220_EN.book 37 ページ ２０１０年２月１２日 金曜日 午前１１時２分