English, 1use, 2technical specifications – Husqvarna TS 66 R User Manual

Page 28: Special instructions

Advertising
background image

20

1 KW - 230 v

70

63

MODEL

POWER

LEVEL

PRESSURE

LEVEL

VIBRATION

LEVEL

Lwa (dB)

EN ISO 3744

Lpa (dB)

ISO 4872

G 89/392/CEE

and 91/368/CE

This symbol indicates that the machine is
in conformance with the applicable
European directive.

The disc cutter is designed to provide safe and
reliable service in operating conditions corresponding
with the instructions, but it can present dangers for the
user and risks of damage, consequently regular on
site inspection is necessary to ensure :

• Perfect technical condition (use for the purpose

for which it is intended and taking into account any
risks, and correction of any malfunction detrimen-
tal to safety).

• Use of a diamond disc for water lubricated cutting

of marble, stone, granite, brick and facings (por-
celain, glazed tiles, ceramics, etc). The use of any
other disc is forbidden (abrasive, saw, etc).

• Competent personnel (qualifications, age, trai-

ning, education) who have studied the manual in
detail before starting work: any fault of an electri-
cal or other nature must be checked by a compe-
tent person (electrician, maintenance foreman,
authorized dealer, etc).

• That the warnings and instructions marked on the

machine are followed (adequate personal protec-
tion, correct use, general safety instructions, etc).

• That no modification, transformation or addition is

detrimental to safety and that it is carried out
without prior authorization from the manufacturer.

• Respect of the maintenance intervals and periodi-

cal checks recommended.

• That only genuine spare parts are used for

repairs.

• Use : Sawing porcelain, glazed tiles, ceramics,

etc...

1

Use

• Tools : Water lubricated diamond

disc diameter 200 mm - bore 25.4
mm (AL).
(Information from your usual
Diamant Boart supplier).

Do not use the saw for any purpose for which it
is not designed (using a saw blade or abrasive
disk which do not conform to the instructions
for use).

Saw blade

Carborundum

disc

2

Technical specifications

• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 54

• Depth of cut (E) :

- at 90° : 40 mm

• Length of cut (L) :

- 660 mm - thickness 10 mm

• Useful width (w) : unlimited

• Dimensions (mm) L x W x H :

900 x 465 x 510

• Unladen weight : 29,5 kg

• Disc cooling by water spray into the disc casing.

• Minimum tank capacity :

- 15 l

• Water pump : adjustable flow

• Electricity supply :

- 230 V : H07-RNF 3 x 1

2

- L 2 m

90°

TP

L

l

E

45°

E

P

Depending

on model

English

SPECIAL INSTRUCTIONS

Instruction plate

TYPE

TYPE

SERIAL

FABRICATION
YEAR

WEIGHT

POWER

VOLTAGE

FREQUENCY

INTENSITY

MAXI TOOL

BORE

SPEED

N° SERIE

ANNEE DE

FABRICATION

PUISSANCE

PLAGE DE

TENSION

FREQUENCE

INT. UTIL.

MASSE UTILE

K g

kW

V

A

Hz

m m

m m

Ø MAXI OUTIL

Ø ALESAGE

T/MN - RPM

MANUFACTURER

POWER

VOLTAGE

± 5 %

CURRENT

0,8 kW (1 CV)

230 V 50 Hz

4,5 A

Advertising