Husqvarna E20 - Manual (Page 12)

12
WINDING THE BOBBIN
Place spool on spool pin with
spool pin felt underneath (a).
Take the thread from the spool
around the bobbin winder
tension disc clockwise. (1)
Thread bobbin as illustrated and
place it on the spindel. Push the
bobbin to the right towards the
bobbin winding position. (2)
Press the foot control gently to wind the bobbin. The bobbin will stop winding when it is full.
Push the bobbin to the left to “sewing position” and remove it.
Please Note: When the bobbin
winder spindle is in “bobbin
winding” position, the machine will
not sew and the hand wheel will
not turn. To start sewing, push the
bobbin winder spindle to the left
(sewing position).