Hitachi CP-S830W/E - Manual (Page 15)

15
ENGLISH
RGB signal input VIDEO signal input
The menu SET UP serves for the change of parameters influencing the picture and for the move picture
position.
Adjustments and functions (continued)
· When start up screen is displayed (''NO INPUT IS DETECTED'' or ''SYNC IS OUT OF
RANGE'' is displayed), SETUP menu items other than VOLUME cannot be set.
· TINT cannot be adjusted with PAL/SECAM video signal input.
· TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.
· V.POSIT, H.POSIT, H.PHASE and H.SIZE cannot be adjusted with a VIDEO signal input.
SET UP
Caution
S E T U P I N P U T I M A G E O P T .
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL
121
57
7
800
R B
S E T U P I N P U T I M A G E O P T .
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL
R B
Adjustment Item Details of adjustment
VOLUME Decrease Increase
BRIGHT
(BRIGHTNESS)
Dark Bright
CONTRAST Lower Higher
SHARPNESS Soft Sharp
COLOR Less More
TINT Red Green
V.POSIT
(V.POSITION)
Moves the picture up or down.
H.POSIT
(H.POSITION)
Moves the picture left or right.
H.PHASE Decreases the picture flicker.
H.SIZE Widens of Narrow the horizontal size of the picture.
COLOR BAL
(COLOR BALANCE)
for Red for Blue