Lights, 2009 ridgeline – HONDA 2009 Ridgeline User Manual

Page 343

Advertising
background image

Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.

Remove the bolts and use the flat-
tipped screwdriver to remove the
holding clip located under the
front bumper.

Push down the inner fender.

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.

Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.

2.

3.

4.

1.

CONTINUED

Lights

Replacing Front Fog/Daytime
Running Light Bulbs

Ma

int
e

na
nce

339

BOLTS

INNER FENDER

CONNECTOR

TAB

HOLDING CLIP

Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.

2009 Ridgeline

Table Of Contents

Main Menu

Advertising
This manual is related to the following products: