Testing calculator operation – HP 35s Scientific Calculator User Manual

Page 290

Advertising
background image

A-4

Support, Batteries, and Service

5. Insert a new CR2032 lithium battery, making sure that the positive sign (+) is

facing outward.

6. Remove and insert the other battery as in steps 4 through 5. Make sure that the

positive sign (+) on each battery is facing outward.

7. Replace the battery compartment cover.

8. Press

.

Testing Calculator Operation

Use the following guidelines to determine if the calculator is working properly. Test
the calculator after every step to see if its operation has been restored. If your
calculator requires service, refer to page A–8.

The calculator won't turn on (steps 1–4) or doesn't respond when you press
the keys (steps 1–3):

1. Reset the calculator. Hold down the

key and press

. It may be

necessary to repeat these reset keystrokes several times.

2. Erase memory. Press and hold down

, then press and hold down both

and

6

. Memory is cleared and the   message is

displayed when you release all three keys.

Warning

Do not mutilate, puncture, or dispose of batteries in fire. The
batteries can burst or explode, releasing hazardous
chemicals.

Advertising