HP 79XXY - Manual (Page 17)

upgrading and servicing the pc 13
Filename: ma1rwtc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 161 Page: 13 of 46 Printed: 04/26/01 09:20 AM
English
6 To prepare an empty card slot for a new card,
loosen the screw of the expansion slot cover of
the empty slot (E). Remove the expansion slot
cover of the empty slot.
E
Warning: Be careful of the sharp edges
on the expansion slot cover.
Avertissement : Soyez prudent, car les
bords du couvercle du support
d’extension sont tranchants.
7 If you are replacing a card, disconnect any
external and/or internal cables attached to the
card.
8 Loosen the screw on the bracket of the card
you are replacing (F).
9 Hold the metal bracket and the far top corner
of the card. Carefully remove the card by
pulling the card straight out of the
expansion slot.
10 Insert the new card into the slot and push
straight down. Make sure the card is properly
seated.
11 Attach the screw to secure the card you have
replaced (F).
F