Running a wash cycle – Hotpoint AQXXF 129 P User Manual

Page 10

Advertising
background image

GB

8

Running a wash cycle

Note: the first time you use the washing machine,

add detergent and run an empty 90°C cotton wash

cycle without the pre-wash phase.

1. SWITCH ON THE MACHINE. Press the

button. All the indicator lights will illuminate for 1

second, after which the light corresponding to

the button will remain lit constantly, while the

START/PAUSE indicator light will flash slowly.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure that the maximum

load quantity indicated in the table of

programmes (below) is not exceeded.

3. MEASURE OUT THE DETERGENT. Pull out the

drawer and pour the detergent into the relevant

compartments as described in “Description of

the machine”.

4. CLOSE THE PORTHOLE DOOR.
5. CHOOSE THE PROGRAMME. Turn the

PROGRAMME knob left or right to select the

required programme, to which a set temperature,

spin speed and wash intensity are linked (these

values may all be modified).

6. PERSONALISE THE WASH CYCLE. Use the

relevant buttons on the control panel:

Modify the temperature and/or the

spin speed. The machine automatically selects

the temperature and the maximum spin speed for

the programme set and these values may not be

increased. By pressing the

button, the tempe-

rature can be progressively reduced or even set

to cold wash (NO HEAT). By pressing the button,

the spin speed can be progressively reduced or

even eliminated altogether (NO SPIN). If the

buttons are pressed again the maximum values

are restored.



Exception: if the “WHITES” programme is

selected, the temperature can be increased up

to a value of 90°C.

Adjust the intensity of the wash.

The machine automatically selects the optimal

wash cycle intensity for a normal level of soiling

in relation to the programme selected. It is

nevertheless possible to increase (for heavily

soiled laundry) or decrease (for lightly soiled

laundry) the intensity level of the wash by

pressing the INTENSITY

button: this

adjustment varies the duration of the

mechanical stage of the wash cycle. In order to

ensure a delicate wash remains guaranteed, it is

not possible to increase the value of the "LOW"

pre-set wash cycle intensity for the "Fast Wash",

"Silk" and "Wool" programmes. This function is

not enabled in the "Rinse & Spin programmes".





 Modify the cycle caracteristics.

Press the OPTION buttons to personalise the

wash cycle according to your own requirements.

• Press the button to activate the option; the

corresponding indicator light will illuminate.

• Press the button again to deactivate the

option; the indicator light will switch off.



If the selected option is not compatible with the

set programme, the indicator light will flash and

the option will not be activated.



If the selected option is not compatible with

another previously selected option, the indicator

light corresponding to the first option will flash

and only the second option will be activated (the

corresponding indicator light will remain lit in a

fixed manner).

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light

remains lit in a fixed manner and the porthole

door locks (the DOOR LOCKED indicator light

illuminates). The icons corresponding to the

different wash phases will light up during the

cycle, indicating the progress. To change a

programme while a cycle is in progress, pause

the washing machine by pressing the START/

PAUSE button; then select the desired cycle and

press the START/PAUSE button again.

To open the door while a cycle is in progress

press the START/PAUSE button; if the DOOR

LOCKED

indicator light switches off it is

possible to open the door. Press the START/

PAUSE button again to restart the programme

from the point at which it was interrupted.

8. PROGRAMME END. The text END lights up to

indicate that the programme has ended. The

porthole door may be opened immediately. If the

START/PAUSE button flashes, press the button

to end the cycle. open the door, unload the

laundry and switch off the machine.



If you wish to cancel a cycle that has already

begun, press and hold the button. The cycle will

be stopped and the machine will switch off.

BAG FOR QUILTS, CURTAINS AND DELICATE

G A R M E N T S
Hotpoint has made it easier for you to wash even

the most valuable and delicate garments in

complete confidence thanks to the special bag

which protects the laundry (this is supplied with the

machine).
We recommend that the bag is used every time you

wash quilts and padded items with an outer layer

made using synthetic material.

Advertising