HP AMS DL320 - Manual (Page 40)

Hardware options installation 40
6. Install the expansion board.
7. Install the PCI riser board assembly (" Installing the PCI riser board assembly " on page 18 ).
8. Install the access panel (" Installing the access panel " on page 17 ).
9. Install the server into the rack (" Installing the server into the rack " on page 25 ).
Storage controller option
IMPORTANT: For additional installation and configuration information, refer to the documentation that
ships with the option.
1. Power down the server (" Powering down the server " on page 15 ).
2. Remove the server from the rack (" Removing the server from the rack " on page 16 ).
3. Remove the access panel (" Removing the access panel " on page 17 ).
4. Remove the PCI riser board assembly (" Removing the PCI riser board assembly " on page 17 ).
5. Install the storage controller (" Expansion board " on page 39 ).
6. Install the PCI riser board assembly (" Installing the PCI riser board assembly " on page 18 ).
IMPORTANT: The server will not power up if the PCI riser board assembly is not seated properly.
7. Remove the fan assembly (" Removing the fan assembly " on page 18 ).
8. Remove the hard drive cables.