1 node and port names, 2 nl_port address – Hitachi ULTRASTAR 15K450 HUS154530VLF400 User Manual

Page 70

Advertising
background image

Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification

54

In addition, the Drive implements FC-FLA as a super-set of the FC-PLDA. Thus, the Drive conforms to FC-PLDA except for
those behaviors explicitly defined by the FC-FLA profile. The PLDA makes the following additional requirements.

1. The FC-4 is SCSI-FCP.
2. The Drive provides a Class 3 Fibre Channel service.

- NO indication of (un)successful class 3 frame delivery is transmitted.

- Frame flow control is buffer-to-buffer only.

- Class 1 and 2 frames are ignored.

3. Direct point-to-point attachment with an N_Port is not supported.

17.1.1 Node and Port names

Every Fibre Channel Node and Port in the world must have a unique name. The Drive is a node with two L_Ports and therefore
has a Node_Name and two Port_Names.

Both the Node_Name and Port_Name are in 64-bit IEEE Registered Name format, as illustrated in Table 24.

Table 24: IEEE Registered Name format

The Name Address Authority field (0101b) specifies the format used for the rest of the name as follows:

• OUI

Organizationally Unique Identifier (24 bits). Canonical form means that each byte is stored in

“bit reversed” order.

• Block Assignment

Block assignment within Hitachi Global Storage Technologies

• Object

Node/Port Identifier

00b

Node

01b

Port 1

10b

Port 2

11b

Not assigned

• S/N

Sequentially increasing drive serial number assigned at manufacturing.

17.1.2 NL_Port address

An NL_Port address, as illustrated in Table 25, is a 3 byte value that uniquely identifies an NL_Port on a Fibre Channel net-
work. The Domain and Area bytes are assigned to a NL_Port by its local FL_Port. The least significant byte in the NL_Port
address is the Arbitrated Loop Physical Address (AL_PA), and uniquely identifies a NL_Port on its local loop.

A Hard AL_PA is one which is supplied, via the Drive connector, from external switches or jumpers. A Soft AL_PA is one
which is assigned during Loop Initialization

Table 25: NL_Port address

Bit

63-60 59-36

35-24

23-2

1-0

0101

OUI in Canonical Form

Block Assignment

S/N

Object

Bits 23-16

Bits 15-8

Bits 7-0

Domain

Area

AL_PA

Advertising
This manual is related to the following products: